Long-run Steel Roofing and Cladding Profile
TRS 5 Steel Roofing and Wall Cladding System
TRS 5
TRS 5 profile is designed for both residential and commercial roofing, as well as wall cladding. It is made from G550 grade steel, with a minimum thickness of 0.40 mm BMT and a maximum of 0.55 mm BMT. The 0.55 mm BMT profile provides greater resistance to high-wind events, such as tornadoes and cyclones.
General
Minimum Roof Pitch: 3°
Effective Cover: 760mm Max
Spans
End Span 0.40/0.55 BMT: 1100mm/1500mm
Internal Span 0.40/0.55 BMT: 1600mm/2200mm
Roofing Fixings
Low/Medium Wind Zone
Timber: class 4 12 x 65mm with neo washer and embossed washer.
Steeltite: 12 x 65mm with neo washer and embossed washer.
High Wind Zone
Timber: class 4 12 x 65mm with neo washer and embossed washer, approved profile’s metal washer and EPDM washer.
Steeltite: 12 x 65mm with neo washer and embossed washer,
approved profile’s metal washer and EPDM washer.
Extra High Wind Zone
Profile and Material: TRS 5 is recommended with a base metal thickness (BMT) of 0.55mm.
Fasteners: Use 12x65mm screws.
Purlin Spacing: Maintain a spacing of 600mm center-to-center.
Screw Pattern: Screws can be fixed at every alternate crest.
Wall Cladding Fixings
Cladding fixing on 20mm. Every pan with 12 gauge class.
4 screws with neo washers. H 3.1 Treated Battens.
Extra High Wind Zone
Profile and Material: TRS 5 with a BMT of 0.55mm is also suitable for wall cladding.
Fasteners: Use 12x50mm screws.
Fixing Pattern: Screws can be fixed at alternate crests.
Note:
TRS 5 is long-run roofing and wall cladding systems. For use as roofing in extra high wind zones, the profile BMT should be 0.55mm, fixed with 12x65mm screws, and the purlin spacing should be 600mm center-to-center. The screw pattern for TRS 5 can be at every alternate crest.
For wall cladding in extra high wind zones, the BMT for both TRS 5 should also be 0.55mm, fixed with 12x50mm screws. TRS 5 can be fixed at alternate crests.
See below for TRS 5 product specifications and downloadable files:
Please note: all colours are available in 0.40mm. Colours marked with * are also available in 0.55mm.
Colour & Finish Options – Lux
Please note:
All Lux finishes are available in 0.55mm base metal thickness, Grade G300, and are suitable for a wide range of architectural roofing, internal and external wall claddings, rainwater goods, and general applications.
While every effort has been made to match the displayed colours as closely as possible to the true colours, digital colour limitations may result in slight variations. For an exact colour match, please request a physical colour swatch from your local store.
Some profiles may have a limited colour range. For more information, consult with your local branch.
You can find the nearest local store by clicking here.
