Ridge Vent RV10P - For roof cladding with a trough depth of <38 mm

Product Overview

The VENT Ridge Vent is designed to release warm air from the roof void using the natural convection of rising warm air or by means of negative pressure created by wind blowing over the roof. The RV10P has an adhesive and flexible aluminium flashing which is designed to form to roofing profiles and prevent water ingress on any pitch roof. The RV10P form part of a passive ventilation system that works year round with no moving parts or energy consumption.

The RV10P is designed to be compatible with roof cladding profiles with a trough depth of <38mm.

Dimensions

It comes in 1.2 metre long
6 pieces (7.2 LM) per Carton

Features

BRANZ appraised
Free Airflow of 8,000 mm2 per linear metre
Releases hot air from roof voids and eliminates condensation
Recommended for cold roof pitch of over 30° and Skillion roof
For trough depths >38 mm use an RV10DT (Deep Trough)
New Build or Renovation
Easy to install – Manufactured in 1200 mm lengths for easy handling
Not visible when covered with ridge flashing (Ridge Flashing not included)
Insect proof – Recommended 4 mm vents to prevent ingress of nesting insects
Manufactured in recycled plastics
30 year warranty

Technical Properties

Between 17mm and 25mm contact with the trough is required, depending on the cladding profile.
Minimum working temperatures to dress down the soft edge flashing is 5°C. Primer or heat gun is recommended below 5°C.
Additional fixing screw lengths is required to accommodate 20mm thickness of the RV10P.