Ridge Vent Deep Trough RV10DT - For roof cladding with a trough depth of >38 mm
Ridge Vent Deep Trough RV10DT - For roof cladding with a trough depth of >38 mm
Product Overview
The VENT Ridge Vent Deep Trough is designed to release warm air from the roof void using the natural convection of rising warm air or by means of negative pressure created by wind blowing over the roof. The RV10DT has an adhesive and flexible aluminium flashing which is designed to form to roofing profiles and prevent water ingress on any pitch roof.
The RV10DT both form part of a passive ventilation system that works year round with no moving parts or energy consumption.
The RV10DT is designed to be compatible with roof cladding profiles with a trough depth of >38 mm.
Dimensions
It comes in 1.2 metre long
6 pieces (7.2 LM) per Carton
Technical Properties
Between 17 mm and 25 mm contact with the trough is required, depending on the cladding profile.
Minimum working temperatures to dress down the soft edge flashing is 5°C. Primer or heat gun is recommended below 5°C.
Additional fixing screw lengths is required to accommodate 20 mm thickness of the RV10DT.